RESEARCH COMMONS
LIBRARY

Stress Distribution And Strength Prediction Of Composite Laminates With Multiple Holes

ResearchCommons/Manakin Repository

Stress Distribution And Strength Prediction Of Composite Laminates With Multiple Holes

Show full item record

Title: Stress Distribution And Strength Prediction Of Composite Laminates With Multiple Holes
Author: Esp, Brian
Abstract: The major purpose of this study was to investigate failure of composite laminates with multiple unloaded holes in close proximity. The least square boundary collocation method for anisotropic materials was utilized to determine the state of stress. The approach utilized collocation on both the internal and external boundaries, making it relatively easy to implement. The method compared favorably to both published and finite element solutions. A failure prediction approach for an infinite, symmetric and balanced laminate, with two holes in close proximity was presented. The baseline material for consideration was IM7/977-3, a carbon fiber/epoxy lamina. The failure prediction method was an extension of the Whitney-Nuismer point stress failure criterion and was flexible enough to account for an arbitrary characteristic dimension value. Conditions for holes oriented transverse to the load and in-line with the load were considered. Both the "hole interaction effect" and "hole size effect" were simultaneously included in the failure prediction. Multiple hole spacings, hole size ratios, and layups were considered for stress distribution and strength prediction. For two equal holes oriented transverse to the load, the predicted strength was at least 95.0% of the single hole strength when the center to center distance divided by diameter, or l/D, was ≥ 3.5. For this same condition, the strength prediction response was nearly layup independent for l/D ≥ 3.0. The presented failure prediction approach was compared to published experimental data and was shown to have good correlation. A series of design curves were presented that allow for the quick determination of a structure's strength with two holes by only requiring the characteristic dimension for a single hole. Two approaches to approximately determine the orthotropic stress concentration factor by using only two parameters were presented. Ten composite materials were investigated to determine the accuracy of the approximation for a variety of material systems. The results showed that a good approximation to the orthotropic stress concentration factor can be obtained by using only the parameters Ex/Ey and Ex/Gxy, regardless of the material system.
URI: http://hdl.handle.net/10106/767
Date: 2008-04-22

Files in this item

Files Size Format View
umi-uta-1969.pdf 2.988Mb PDF View/Open
2.988Mb PDF View/Open

This item appears in the following Collection(s)

Show full item record

Browse

My Account

Statistics

About Us