RESEARCH COMMONS
LIBRARY

Testing & Design Life Modeling Of Polyurea Liners For Potable Water Pipes

ResearchCommons/Manakin Repository

Testing & Design Life Modeling Of Polyurea Liners For Potable Water Pipes

Show simple item record

dc.contributor.author Kanchwala, Mustafa Z. en_US
dc.date.accessioned 2010-07-19T19:54:44Z
dc.date.available 2010-07-19T19:54:44Z
dc.date.issued 2010-07-19
dc.date.submitted January 2010 en_US
dc.identifier.other DISS-10628 en_US
dc.identifier.uri http://hdl.handle.net/10106/4904
dc.description.abstract Currently, there are various renewal methods available for different applications, among which coatings and linings are most commonly used for the renewal of water pipes. Polyurea is a lining material applied to the interior surface of the deteriorated host pipe using spray technique. It is applied to enhance the structural ability of the pipeline. This thesis presents the preliminary results of an ongoing laboratory testing program designed to investigate the renewal of potable water pipes using polyurea spray lining. This research focuses on predicting the long-term behavior of polyurea composite. The goal of this test was to establish a relationship between stress, strain and time. The results obtained from these tests were used in predicting the life and strength of the polyurea material. In addition to this, based on the 1,000 hours experimental data, curve fitting and Findley Power Law models were employed to predict long-term behavior of the material Findley's power law accurately predicted the non-linear time-dependent creep deformation of this material with acceptable accuracy. Experimental results indicated that this material offers a good balance of strength and stiffness and can be utilized in structural enhancement applications in potable water pipes. en_US
dc.description.sponsorship Najafi, Mohammad en_US
dc.language.iso EN en_US
dc.publisher Civil & Environmental Engineering en_US
dc.title Testing & Design Life Modeling Of Polyurea Liners For Potable Water Pipes en_US
dc.type M.Engr. en_US
dc.contributor.committeeChair Najafi, Mohammad en_US
dc.degree.department Civil & Environmental Engineering en_US
dc.degree.discipline Civil & Environmental Engineering en_US
dc.degree.grantor University of Texas at Arlington en_US
dc.degree.level masters en_US
dc.degree.name M.Engr. en_US
dc.identifier.externalLink https://www.uta.edu/ra/real/editprofile.php?onlyview=1&pid=1765
dc.identifier.externalLinkDescription Link to Research Profiles

Files in this item

Files Size Format View
Kanchwala_uta_2502M_10628.pdf 9.889Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

Browse

My Account

Statistics

About Us