RESEARCH COMMONS
LIBRARY

An Experimental Investigation Of Ionization Of Supersonic Air By A Corona Discharge

ResearchCommons/Manakin Repository

An Experimental Investigation Of Ionization Of Supersonic Air By A Corona Discharge

Show full item record

Title: An Experimental Investigation Of Ionization Of Supersonic Air By A Corona Discharge
Author: Satyanand, Udyavar S.
Abstract: A technique is developed to ionize supersonic air flow in a shock tube by a weak corona discharge. The driven section of the tube is open to the atmosphere. The shock propagates in the driven section at about 1 km/s by means of an area contraction near the downstream end of the driven section. Air is ionized by a unipolar corona discharge device comprising of a sharp-edged wedge as a high-field electrode inserted in a 41.25 mm (2 in.) ID tube that forms a low-field electrode. The device requires less than 0.5 W. A ring probe, downstream of the corona discharge device, collects charges (ions and electrons) from the air; its output voltage is thus a measure of the degree of ionization. The degree of ionization is varied by varying the corona discharge voltage and the flow speed. Corona generation was initially demonstrated with bench tests. These indicated an increased degree of ionization with an air flow created by a fan, relative to that in static air. Tests in a shock tube, with subsonic and supersonic air flow, and with a negative corona, provided results with the same ionization behavior. The operating range of discharge voltages is relatively small for a positive corona; hence, shock tube tests were confined to a negative corona. Shock tube test results indicate that, on a 10 millisecond time scale, corona generated ionization was convected downstream to the probe location in a supersonic flow. An anomalous shock tube result is a probe signal, without a corona discharge, that is similar, but weaker, to the signal with a discharge. Although the tests were done with shock speeds up to about 1 km/s and with atmospheric air ahead of shock wave, the technique of ionization and plasma measurement can be extended to higher speeds and lower pressures. It is also suggested that a supersonic wind tunnel with a Langmuir probe be used for this type of work.
URI: http://hdl.handle.net/10106/325
Date: 2007-08-23
External Link: https://www.uta.edu/ra/real/editprofile.php?onlyview=1&pid=274

Files in this item

Files Size Format View
umi-uta-1030.pdf 2.647Mb PDF View/Open
2.647Mb PDF View/Open

This item appears in the following Collection(s)

Show full item record

Browse

My Account

Statistics

About Us