RESEARCH COMMONS
LIBRARY

Failure Analysis Of Composite Laminates With A Hole By Using Finite Element Method

ResearchCommons/Manakin Repository

Failure Analysis Of Composite Laminates With A Hole By Using Finite Element Method

Show full item record

Title: Failure Analysis Of Composite Laminates With A Hole By Using Finite Element Method
Author: Roy, Moumita
Abstract: Predicting the strength of a given laminate has been extensively studied. There have been several fracture models proposed but still the immense tests of composite laminates are still needed. Different material systems or lay-ups exhibit different failure modes and failure mechanisms. This thesis focuses in investigation of the failure mechanism of the [±θ/02]s and [02/±θ]s laminates with a hole. ANSYS finite element models with and without a crack in vicinity of hole were developed to investigate the effect of the stress distribution due to the presence of the angle ply crack. The stress concentrations were obtained. It is found that The stress concentrations increases as d/w increases for a given θ in [±θ/02]s and [02/±θ]s laminates For a given d/w ratio, the stress concentrations increases as ply orientation,θ increases The high stress concentrations on 0o ply occurs at the location where the θ-ply crack intercepts at the line perpendicular to the 0o ply Based upon the understanding the failure mechanism, a simple expression to estimate the strength of laminates with a hole is established. A strength model based upon the 0o ply load carrying capability is proposed. Prediction is a good agreement with the experimental results.
URI: http://hdl.handle.net/10106/311
Date: 2007-08-23
External Link: https://www.uta.edu/ra/real/editprofile.php?onlyview=1&pid=229

Files in this item

Files Size Format View
umi-uta-1115.pdf 734.4Kb PDF View/Open
734.4Kb PDF View/Open

This item appears in the following Collection(s)

Show full item record

Browse

My Account

Statistics

About Us